Quiet around here as I’m not doing a lot of gaming, painting, or terrain building this summer. Too busy with other things! I did have a couple of fantastic games of WW2 coastal forces earlier in August, and will get those photos up here in the next little while.
I recently got a well-stuffed box of awesome stuff from Fenris Games as part of their Toadstool Brownies Kickstarter, including whole forests full of mushrooms and some really neat tiny brownie and kobold figures. I’ll get some more photos of those and get some sort of review up soon-ish.
On to links… over on Empire of Ghosts we have some rather nice small scale islands in two styles, one tropical for Caribbean/the Med and one more northerly for the North Sea. They’re nominally 6mm or 1/300 to match the Warlord Cruel Seas boats and others, but as designed they’re pretty scale-neutral and the basic ideas will serve for even smaller scales too.
My excellent local game store started carrying UV resin and I picked some up a while ago, intending to try it out for windows in various buildings. Usefully, I just found this tutorial on using UV resin for windows over on the Comm Guild blog, which should prove useful when I finally get around to finishing the MDF church I started a few years ago.
More content here as the summer comes to an end in a month or so, I promise!
Well, “a few weeks” in my last update apparently turned into two months of radio silence here. Oops.
Build Something Contest 2021 over on LAF had the end date pushed back by two weeks due to the organizer having an attack of Real Life, but it’s wrapped up and voting should start this week over on Lead Adventure!
I’ll get a full gallery of all my build shots up after voting begins, but in the meantime here’s a teaser from early in construction of my entry, which wound up named the “Dark Pool of Dark Darkness”…
Quiet here the last week or so because I’ve been thoroughly distracted by Lead Adventure Forum’s Build Something Contest 2021!
Lots of cool entries in progress over on the BSC subforum of LAF. Posting WIP photos elsewhere is discouraged but I’ve taken lots of photos so far of the rocky moor piece I’m doing and I’ll be sharing them here in a month or so when the contest is concluded.
I do have some other stuff I’ll be showing off, including some scatter pieces I just finished that I’m quite happy with, so it won’t be totally dead here but go check out the BSC and look for my updates there!
Corey has a 3d printer, as has featured here many times, and a little while ago he cranked out half a dozen barrels in Gaslands-ish scale. His printer was being temperamental, however, and they wound up a bit lumpy and mis-printed. The care and feeding of 3d printers appears to be an entire hobby unto itself, one I’m happy to leave to him…
Waste not, want not, though and on a post-apoc deathtrack battered misshapen barrels seem more likely than pristine clean ones anyway, so I took them, stuck them in a rough line on a base made of a lump of Milliput, and chucked some paint on ’em.
After my usual grey spray primer the barrels got a reddish-orange rust basecoat, then I painted them alternating white and red, to fit with the general colour scheme on our Gaslands arenas.
All the paint was stippled on to be deliberately scruffy and let the rust basecoat show through, and then I drybrushed various shades of rust, dust, and grime back over everything. I think there was a dark brown wash in there too, but can’t actually recall.
This was a nice quick little barricade, done over a couple of short sessions, and a good way to reuse slightly misprinted but still basically intact bits!
Went on a bit of a book buying spree recently in aid of getting more background material for my WW2 coastal naval gaming; among the classic references in the field are the trilogy of books published in the 1990s by Leonard C. Reynolds, Dog Boats at War, Mediterranean MTBs At War, and Home Waters MTBs & MGBs at War. Except for Dog Boats, they’ve been out of print ever since.
I looked through a few different used book websites and eventually wound up getting all three through different ABE Books sellers, despite my standing desire not to funnel money toward noted sociopath Jeff fuckin’ Bezos.
I also picked up three Osprey books on the same subject, because one of the ABE resellers is also a full-service new book store as well and Ospreys are usually worth it. Those were E-Boat VS MTB, German E-boats 1939-45, and British Motor Torpedo Boat 1939-45.
If you’re looking for reading material on the coastal forces of WW2, I highly recommend the Publications page of Spitfires of the Sea, and the rest of that website while you’re at it. It’s written by Stephen Fisher, an archeologist/historian specializing in 20th C naval matters. He also tweets as @SeaSpitfires and is well worth following there.
Cement Saul is a fairly new YouTube channel that has been doing a bunch of interesting Gaslands-related videos. I especially like the video on Weathering with Coloured Pencils and Pigments. Pigments (pastel chalk dust, or similar) are familiar to me and I’ve used them in the past, but weathering with actual coloured pencils hadn’t occured to me and I’m going to have to try that out! It’s part of a series on painting, stencilling, detailing, and weathering cars that’s well done, approachable, and worth your time.
Light Industries is a Canadian outfit that do various decals including custom work; I always like to find Canadian sources for things when I can!
Misc Minis do various decals as well, including tiny decals suitable for 1/1200 vessels or aircraft. I contacted him back in January 2021 about getting a little sheet of his smallest decals, got it in just a few weeks for much less money than I was expecting, and will do a proper review of them sometime soon!
I’ve always know that hanging paint brushes bristles down to dry was better for them, but never bothered doing anything about it. Recently my selection of brushes has expended as I’m using cheap makeup brushes for drybrushing and, right at the other end of the brush quality spectrum, my wife spoiled me at Christmas with a trio of gorgeous W&N Series 7 brushes, the seriously expensive ones.
My painting bench is an old Ikea modular shelving unit, and I realized I could add a brush rack to the underside of one of the shelves just off my actual painting area, where it would be out of the way but close at hand for convenience.
Even better, I realized with a few seconds of experimenting that I could make a functional brush rack from scrap foam and recycled cardboard! The foam happens to be sheets from Infinity box sets, about 4″ by 6″ or so; I took one sheet of that, cut it in half lengthwise, and then cut a series of slits about an inch apart and maybe an inch and a half deep.
I hot glued the foam to scrap cardboard from the recycling bin, then hot glued the whole assembly into place on the underside of the shelf just on the left hand edge of my painting bench. If I ever decide to replace it or move it, the hot glue can be popped off the wood of the shelf fairly easily.
The slit foam will even hold the wide handles of the cheap makeup brushes I’ve started using recently for drybrushing and the 2.5″ housepainting brush I use on big scenery projects. Given it cost me exactly nothing to make, took just a couple of minutes, and uses a spot on my hobby bench that was previously empty space, I’m very pleased with this little project!
Up next was the “GATE” lettering and giant numbers for the three numbered gates.
I cut the giant numbers from sheet styrene and mounted them on strips of scrap styrene. The GATE lettering was 3d printed as separate letters and then mounted on very thin square section styrene strip. To make that easy I taped long pieces of the styrene strip down to my cutting mat, glued the letters down, then once the glue had cured cut each word out.
Everything got spray primed grey and then basecoated the same blotchy rust I’d used on the overhead gantry and elsewhere. I stippled and drybrushed everything with a couple of different shades of off-white (Reaper Linen White and Leather White, primarily) before a final drybrush of Reaper Pure White.
After that it was back to the weathering, primarily drybrushing with a big soft makeup brush. I only just picked one of these up, a super cheap dollar store special, and it really is the bomb for drybrushing! I used a fairly random selection of browns, reds, tans, and off-whites for this, going back and forth over all the towers and the gantry as well.
While adding the lettering I had finally primed, painted, and installed the roof on the announcer/race official cab on the lefthand start gate tower. I thought about installing mesh on the windows but decided to leave them open for now; I might go back in and add some additional protection for the folks who wave the chequered flags but the current form will do for now!
Final touches and some finished shots soon as this project finally wraps up and might actually hit the table sometime soon!
When we last saw our gates they were basecoated but stalled due to missing 3d printed parts. Those arrived, thanks to my brother’s 3d printer, and I was able to move on with the project.
I didn’t want to start the overhead gantry on the Start/Finish gate until I had the 3d printed “Esquimalt Thunderdome” sign in hand, but once I had that the basic construction went together quickly.
The three openwork girders have been in my stash for decades and the packaging is long gone, but they’re from Plastruct – possibly these ones, which seem to be about the right size. You can find all the similar openwork web girders from Plastruct by searching their site for “web”.
The girders are only six inches long, so I knew I’d need to extend the gantry with other materials as the Gaslands rules call for gates the same width as a Long Straight movement template, which is roughly 7 inches long, and Corey’s Thunderdome racetrack dirt track is roughly 8 inches wide. Fully finished, this gantry is almost 10 inches long, and slots into the roof structure of the two vertical gate towers to hold everything together.
The rest of the gantry was a random scatter of styrene shapes from the stash – there’s some flat C-channel, different T- and H-girder bits, and lots of square or rectangular cross section stuff. It had to both look structurally sound and actually have a certain amount of structural integrity, but the beauty of post-apoc engineering is that it still looks great if you bodge extra bits on to fix earlier problems!
After grey primer I covered the whole thing in a blotchy rust coat using a couple of different shades of browns, reds, and oranges.
After the rust coat I did a blotchy coat of white, partly drybrushed and partly stippled into place. This came out far better than I’d hoped, and really looks like white paint that’s flaking off as the metal under it rusts and weathers.
The speaker cabinets and loudspeaker horns were 3d printed from STLs on Thingiverse, both from a very nice collection of Gaslands parts. The speaker cabinets were printed in two different sizes, which added some visual interest.
The speakers got painted a blotchy off-black (Reaper Pure Black with a dot of one of their greys mixed in) and the loudspeakers got one of the many tan off-whites in my collection, I can’t remember which one.
The clutter of speakers and loudspeakers really makes this piece pop, it’s exactly the visual clutter I’d pictured in my head when first thinking these designs up!
I’d like to add some light fixtures, but it seems nobody makes 20mm 3d printable floodlight fixtures, at least not that I can find, and I’d want enough of them that scratchbuilding isn’t really an option unless I can come up with a really simple design…
Next up, painting and installing the big “GATE” signs and numbers on the rest of the gates, and loads more weathering. So much weathering…
A scattering of links for our first Links of Interest of 2021!
More possible sources of small scale scenery are always welcome, and over on Wargaming3d Wozname has started a new line of 3d printable STL files for 1/1200 scenery, starting with a few entire islands and some castles. Really neat to see people doing entire pieces in these tiny scales that would be basically impossible to do in any larger scale!
On the small scale naval gaming theme, the Society of Twentieth Century Wargamers has a couple of articles on small boat actions in the Mediterranean in WW2, with one article on mostly focusing on British vs Axis and the second spotlighting American PT boats. They’re framed around Cruel Seas but trivially easy to adapt to other rule sets.
Reaper Minis hosted a Virtual Reaper Con last weekend, and while I’d initially signed up for four classes on various painting topics, the world conspired to only allow me to attend one class, a fantastic discussion of “Additives, Mediums, and Texture Pastes – Oh My!” by Rhonda “Wren” Bender, talking about matt and gloss mediums, flow aids, drying extenders, glaze medium, texture pastes, and various other things as they apply to miniature painting. The class handout is available at the link above, the session was recorded and will eventually show up on Reaper’s YouTube channel, and Rhonda has a great website of her own over at Bird With A Brush that’s well worth checking out.
Incidentally, the anchor chain stock photo being used as a header for these Links of Interest posts is by CastleLight from Pixabay.